the fan shroud cleaned up
 |
| (as removed from the car) |
 |
(after a good soaking in Mean Green Super Solution
and then scrubbed with a nylon bristle brush) |
 |
(after gingerly scraping off the decals and then the
entire shroud scrubbed with a burgundy scotch brite pad and WD40. Wiped down and again
coated with WD40 and allowed to soak in and dry) |
and set in place, then the drain petcock installed...
radiator mounted and everything reconnected to it.
Next week check all clamps are tight and add coolant!!
Until next installment.....
ZEBRA 3 OUT
No comments:
Post a Comment