Clean sweep.... part 2

I finished vacuuming the underside of the car this weekend. Looking at the pics just now I see a few spots I missed, but they will be addressed when the underside gets wiped down prior to the first coat of POR 15....

You'll notice some seam sealer along the underbody of the car... I figured if it didn't come off during the sandblasting and it resisted being scraped off that it was on there for the long haul and left it alone. Hope that doesn't come back to bite me in the butt!

I also got the sand blasting cabinet set up and put through it's paces.I tried it out on the passenger side rear lower control arm and it took almost an hour to do. I need to do some tweaking because the gun shoots a wide pattern that doesn't cut too well. As you can see it didn't do a very good job on the inside legs of the LCA.... But it was nice to be able to see what I was doing and not have sand getting into every nook, crack and orifice of my body! LOL

Stay tuned...........

ZEBRA 3 OUT

Clean Sweep.... part 1

Well Saturday after playing with the headers I got started vacuuming up the Great American Dust Bowl. Got the frame forward of the firewall all cleaned out...

**CLICK ON PICS TO ENLARGE AND CLICK AGAIN TO SUPERSIZE**

and got the body swept up as well (though I do see a few spots I missed looking thru my pics just now).....

 

 

 

 

Next week I'll go under the car to clean up the rest of the frame and underbody.

More to come............

ZEBRA 3 OUT