More stuff knocked off the TO DO list... checked out the operation of my sirens and one set isn't working, so I'll have to dig into them and see what's going on.
Finished the wiring to the lighted visor...
as well as getting the high output alternator wiring wrapped up.
Installed the firewall vacuum tee...
the smaller vacuum canister on the driver side wheelhouse...
and temporarily mounted the AC compressor so I could hang the compressor mounted power steering cooler to determine the routing of the power steering cooling circuit.
Also lit off the 460 to get a bit of heat into the motor to evaporate the remaining coolant in the block. The engine compartment is slowly looking complete once again.
Next weekend, I'll work on getting the radiator and AC condenser reinstalled as well as rehanging the front fenders in preparation for installing the headlight buckets and header panel.
Finished the wiring to the lighted visor...
as well as getting the high output alternator wiring wrapped up.
Installed the firewall vacuum tee...
the smaller vacuum canister on the driver side wheelhouse...
and temporarily mounted the AC compressor so I could hang the compressor mounted power steering cooler to determine the routing of the power steering cooling circuit.
Also lit off the 460 to get a bit of heat into the motor to evaporate the remaining coolant in the block. The engine compartment is slowly looking complete once again.
Next weekend, I'll work on getting the radiator and AC condenser reinstalled as well as rehanging the front fenders in preparation for installing the headlight buckets and header panel.
Don't touch that dial.....
ZEBRA 3 OUT
No comments:
Post a Comment