Blasted... Part 4

With line wrenches in hand, I set about finishing up dropping the rear end assembly from under the Tomato. I removed the brake line from the brake hose, removed the hose clip and then freed the brake hose from the crossmember...

With the brake line free, using an impact and open end wrench, I unbolt the upper and lower control arms from the frame mounts and lowered the axle assembly to the floor...

I then slid the assembly from under the car and placed on 3 jack stands for further disassembly and service.

That's all for this installment.

Until next time...

ZEBRA 3 OUT